4GModule-EC600S-CN|LoRa Module, UART Module, Wi-Fi Module,sub-G Module Manufacturers, Factory-vollgo

Main performance

parameter	instruction
powered by	● VBAT supply voltage range：3.3-4.3V ● Typical supply voltage：3.8V
Transmit power	●Class 4 (33 dBm ±2 dB) for EGSM900●Class 1 (30 dBm ±2 dB) for DCS1800 ●Class E2 (27 dBm ±3 dB) for EGSM900 8-PSK ●Class E2 (26 dBm ±3 dB) for DCS1800 8-PSK ●Class 3 (23 dBm ±2 dB) for LTE-FDD bands ●Class 3 (23 dBm ±2 dB) for LTE-TDD bands
LTE characteristic	●Maximum support Cat 1 FDD and TDD●support 1.4/3/5/10/15/20 MHz RF bandwidth ●LTE-FDD：Maximum downlink rate 10 Mbps，Maximum upstream rate 5 Mbps ●LTE-TDD：Maximum downlink rate 7.5 Mbps，Maximum upstream rate 1 Mbps
GSM characteristic	GPRS：●Support GPRS multi-slot level 12 ●Encoding format：CS-1/CS-2/CS-3/CS-4 ●Maximum downlink rate 85.6 kbps, maximum uplink rate 85.6 kbps EDGE： ●Support EDGE multi-slot level 12 ●Support GMSK and 8-PSK modulation and coding methods ●Downlink coding format: CS 1-4 and MCS 1-9 ●Uplink coding format: CS 1-4 and MCS 1-9 ●Maximum downlink rate 236.8 kbps, maximum uplink rate 236.8 kbps
Network protocol characteristics	●support TCP/UDP/PPP/NTP/NITZ/FTP/HTTP/PING/CMUX/HTTPS/FTPS/SSL/FILE/MQTT/MMS/SMTP/SMTPS*protocol●Support PAP and CHAP protocol
short message（SMS）	●Text and PDU mode●Point-to-point SMS sending and receiving ●SMS cell broadcast ●SMS storage: currently stored in (U)SIM card
(U)SIM interface	●Support USIM/SIM card: 1.8 V and 3.0 V
Network protocol characteristics	● Support TCP/UDP/PPP/FTP/HTTP/NTP/PING/QMI/NITZ/CMUX/HTTPS/SMTP/MMS/FTPS/SMTPS/SSL/FILE protocol ● Support PAP (Password Authentication Protocol) and CHAP (ChallengeHandshake Authentication Protocol)
Audio characteristics	●Support 1 digital audio interface: PCM interface●GSM：HR/FR/EFR/AMR/AMR-WB ●Support echo cancellation and noise suppression
PCM interface	●For audio use, an external codec chip is required
USB interface	●Compatible with USB 2.0 (only slave mode is supported), the data transfer rate is up to 480 Mbps●Used for AT command transmission, data transmission, software debugging and software upgrade ●USB virtual serial port driver: support Windows 7/8/8.1/10, Linux 2.6~5.4， ●USB driver under operating systems such as Android 4.x~9.x
Serial port	Main serial port： ●Used for AT command transmission and data transmission ●The baud rate defaults to 115200 bps ●Support RTS and CTS hardware flow control Debug serial port: ●Used for partial log output ●The baud rate is 115200 bps
ATOrder	●3 GPP TS 27.007 and 3 GPP TS 27.005 Defined commands, and Quectel enhanced AT commands
Network instructions	● NET_MODE and NET_STATUS Two pins indicate network status
Antenna interface	●Main antenna interface（MAIN_ANT）●50 Ω Characteristic impedance
Physical properties	●Size：(22.9 ±0.15) mm × (23.9 ±0.15) mm × (2.4 ±0.2) mm
software upgrade	●Can be upgraded via USB interface or FOTA
RoSH	●All devices are fully compliant with EU RoHS standards
buy	buy

It is recommended to purchase in accordance with the MPQ quantity.

Evaluation board：

sub 1G Series

Bluetooth Series Module

4G series module

VOL-cloud

Application solution

4GModule-EC600S-CN

4GModule-EC600S-CN

contact us