4G模块-EC200U|LoRa Module, UART Module, Wi-Fi Module,sub-G Module Manufacturers, Factory-vollgo

Main performance

parameter	instruction
powered by	● VBAT supply voltage range: 3.3-4.3V ● Typical supply voltage: 3.8V
Transmit power	●Class 4 for EGSM900 ●Class 1 for DCS1800 ●Class 3 for LTE-FDD bands ●Class 3 for LTE-TDD bands
LTE characteristic	●Maximum support for Cat 1 FDD and TDD ●Support 1.4/3/5/10/15/20 MHz RF bandwidth ●LTE-FDD: Maximum downlink rate of 10 Mbps, maximum uplink rate of 5 Mbps ●LTE-TDD: The maximum downlink rate is 8.96 Mbps, and the maximum uplink rate is 3.1 Mbps
GSM characteristic	GPRS： ● Support GPRS multi-slot level 12 ● Coding format: CS-1/CS-2/CS-3/CS-4 ● Maximum downlink rate 85.6 kbps, maximum uplink rate 85.6 kbps
Network protocol characteristics	●Support TCP/UDP/PPP/NTP/NITZ/FTP/HTTP/PING/CMUX/HTTPS/FTPS/SSL/FILE/MQTT/MMS protocol ●Support PAP and CHAP authentication of PPP protocol.
Short message (SMS)	●Text and PDU mode●Point-to-point SMS sending and receiving ●SMS cell broadcast ●SMS storage
(U)SIM interface	●Support (U)SIM/SIM card: 1.8 V and 3.0 V
Audio characteristics	●Support 1 analog audio input and 1 analog audio output●GSM：HR/FR/EFR/AMR/AMR-WB ●Support echo cancellation and noise suppression
USB interface	●Compatible with USB 2.0 (only slave mode is supported), the data transfer rate is up to 480 Mbps●Used for AT command transmission, data transmission, software debugging and software upgrade ●USB virtual serial port driver: support Windows 7/8/8.1/10, Linux 2.6/3.x/4.1~4.14, ●USB driver under Android 4.x/5.x/6.x/7.x/8.x/9.x and other operating systems
Serial port	Main serial port： ●Used for AT command transmission and data transmission ●The maximum baud rate is 921600 bps, and the default is 115200 bps ●Support RTS and CTS hardware flow control Debug serial port： ● Used for partial log output ● The baud rate is 921600 bps ● Can only be used as a debugging serial port, not a general-purpose serial port Auxiliary serial port： ● When using the Bluetooth function, the auxiliary serial port cannot be used, please refer to the specific description第 3.12* 章
SD interface*	●Compliant with SD 2.0 protocol
WLAN interface*	●Supports SDIO 1.1 interface for WLAN function
LCD interface*	●LCD interface supporting SPI mode
AT命令	●Commands defined in 3GPP TS 27.007 and 3GPP TS 27.005, and Quectel enhanced AT commands
Network instructions	●NET_MODE and NET_STATUS two pins indicate the network status
Antenna interface	●Main antenna interface (ANT_MAIN), Wi-Fi/BT antenna interface (ANT_WIFI/BT) and GNSS antenna interface (ANT_GNSS)●50 Ω characteristic impedance
position	●Support Wi-Fi Scan/GNSS
Physical properties	●Size：(28.0 ±0.15) mm × (31.0 ±0.15) mm × (2.4 ±0.2) mm●weight： 4.1 g
temperature range	●Normal working temperature：-35 °C ~ +75 °C●Extended operating temperature：-40 °C ~ +85 °C ●storage temperature：-40 °C ~ +90 °C
software upgrade	●Can be upgraded via USB interface or DFOTA*
RoHS	●All devices are fully compliant with EU RoHS standards
buy	buy

It is recommended to purchase in accordance with the MPQ quantity.

Evaluation board：

sub 1G Series

Bluetooth Series Module

4G series module

VOL-cloud

Application solution

4G模块-EC200U

4G模块-EC200U

contact us